[Eric Ruckman] sent us this awesome Guitar Hero hack. He wanted to get a more "true to the series" game play out of his DS when playing Guitar Hero: On Tour. If you've seen the adapter that comes with it, you'll understand his desires. He found a wireless PS2 Guitar Hero controller on EBay to hack.
He's cut a hole in the controller and removed all the guts. In the picture above the DS fits in the hole to allow strumming in the correct position. The controller buttons are connected to the DS by wiring into the adapter. He's added an FM transmitter to the controller so he can play the sound through his home sound system.
The video above supposedly shows a Playstation 3 booting a game from the hard drive by booting a legitimate game from disc. There aren't many other details besides a comment that backing up Blu-ray discs takes a lot of space. So, if this does actually work, it's doubtful we'll see much piracy because of it.
Apparently you can run pretty much anything on a PS3. [mopx0] has managed to get Vista running on his PS3. He used Qemu 9.0.1 to install Vista on a PC. He says it takes "about a day or so", after using Vlite to speed it up, so be patient. You then make an image of the install and copy it to your PS3. Don't worry though, your hard work will be rewarded by a speedy 25 minute boot time when you're done.
Even though it is extremely slow, to the point of being nearly unusable, its good to see people pushing the boundaries of our hardware's intended use.
[Codejunkie] has written up a great explanation as to why we mod. He's specifically talking about the Sony PSP, but many of the points he makes carry over to any modding. Though the "why" question may seem like a no brainer to most of us, we do hear it a lot. We strongly suggest you take a few moments to read his article.
Who hasn't been asked this question? We all have different reasons to mod things. Some people do it to make improvements, some people do it just for the fun. He lists some of the more practical reasons and makes some insightful comparisons.
For example, he likens some modding to making personalizations to your car. Has anybody asked why you put a custom shifter knob on? No, because we are used to this, just as they are used to being locked out of their electronics. He also talks about products that are crippled from the factory. We've covered this situation on Hack a Day before. Is it wrong for you to want your product to function to its built in potential?
He covers a few thoughts on homebrewing software for the PSP as well. There's no reasonable explanation for why you shouldn't have full control over something you own.
DSPmusic.org has just released the latest version of its homebrew PSP music sequencer PSPSeq 3.0. With PSPSeq you can create songs with up to 16 independent audio tracks, use WAV audio clips of your own and then modify them with a number of settings, or even use some of the built in synthesizers to generate sounds. There are strong looping and recording features as well. If you are into homebrew music apps on the PSP, then this will give you a strong offering of features. We had a chance to catch up with the author, [Ethan Bordeaux], and ask a few questions. You can check out the short interview after the break.
The people at Near Future Laboratory are trying to spoof the behavior of a Playstation 2 controller using just a microcontroller. They wrote some initial code using the controller info found here, but decided the best way to figure out what was going on, was to probe the interface. They're using a Logicport, which features 34 channels plus two clock channels. They only need six channels because the PS2 implements an SPI protocol plus an ACK line. The post is just a preliminary investigation, but will give you a little insight into how the Logicport works and why you might find it useful.
This is quickly becoming an unintentional "game controller Saturday". We haven't been covering the PSP much lately, so this is a treat. AcidMods forum member [Electro] put together a quick guide for adding two missing shoulder buttons to the PSP. The L2 and R2 buttons are used while playing Playstation 1 games and are usually mapped to directions on the joystick. This mod jumps the joystick's contacts an relocates the buttons to the shoulders. The switches used in the post seem kind of bulky, but you're free to use anything that fits.
Acimods contributor [Blizzrad] has just finished one of the cleanest mods we've seen in a while. With minimal modification to the outside of the PSP he was able to add an external PS2 controller. This naturally took a lot of internal modification. The controller and PSP use a 25 pin SMT connector salvaged from a laptop. The controller's connector housing is from a set of component cables. Video after the break plus some wiring pictures.
Let the how-to's begin: [Ben Heck] put up the first installment of his how-to series on making your own PS3 laptop. Since this one is all about the tear down, you might dig the PS3 design even if you're not interested in making your own portable.
[Ben]'s been at it again. This time he's whipped up a PS3 laptop. He built this one just for engadget... and there will be how-to's on it, oh yes, there will. For now, you can wet your appetite for console modding with the picture gallery. It's pretty big, but It's actually thinner than the original console.
This is an older set of hacks, but I'm surprised we haven't covered them before. The playstation controller is an interesting alternative to normal robotic controls. This PS1 controller to serial interface is based on a Motorola HC68 series micro-controller. This even simpler version only needs some diodes to interface with a parallel port. Probably more interesting is this how-to on using a wireless PS2 controller with a basic stamp II.
[Joel] sent in his efforts to build an inexpensive 360 degree head tracking display. He's using a Playstation six axis controller as the key to his helmet tracking system. The demo is short and to the point. He's using the usual Glovepie driver to provide the software interface and what looks like off the shelf hardware on the helmet.
What really grabs my attention is the low cost of getting into VR now. Assuming that you own a computer, you can build your own VR setup for the cost of a Playstation controller and a cheap heads up display. (Remember these?)
[Shane] put together this funky bluetooth headset hack so he could use his headset with both his PSP and his PS/2. It starts with a Cardo Bluetooth adapter. He added both a PSP headset style connector and a standard 2.5mm plug to a custom pigtail. Then he can use it with either a PSP headset remote or a modified USB PS/2 headset adapter.
[Robin] over at acidmods sent in this interesting PSP mod. [PvP] added an internal hard drive (with the exception of a mini-usb cable sticking out the top) to his PSP. The advantage? Laptop hard drives are dirt cheap while sony memory sticks are still pretty pricy. More details should be along soon, but [Robin] assures me that this means up to 200GB of storage is possible for the PSP.
Just in time to keep your friends from sharing your toys, [l0rdnic0] brings you this simple mod: replace your power switch with a reed switch. Of course, now you'll need a magnet every time you want to use your PSP. Of course, if my older brother did this, I'd build a big electromagnet and start firing it whenever he started playing games.
